Cushy-foot mounts for generators, blowers, pumps and other industrial equipment requiring stable support and vibration isolation.

Conveyor loading-zone impact pads positioned below the belt to absorb falling-material energy, help protect the belt structure, reduce sagging and support reliable bulk-material handling.

Flexible tyre couplings for gensets, pump sets and drive mechanisms. The flexible element helps absorb shock and vibration while accommodating angular, parallel and axial misalignment.

Adaptor mounts for heavy-duty mobile and industrial applications where the machine or engine interface must be connected to the base frame while controlling vibration and shock.

The machine can be directly installed on these mounts, thus conventional foundation with pre-requisties of Digging, Grouting, Concreting of Foundation Bolts are completely eliminated

Low-profile cushy-float mounts for static and mobile equipment. Originally developed for marine-engine applications, the HDCF arrangement provides three-way vibration control together with bump and rebound support.

This is universally accepted mount for protection from shocks, severe environments, high frequency vibrations and structure borne noises. They can be mounted in any orientation for protecting sensitive equipment’s from high impact shock.

These mounts are mobile and are not fixed and it can be rotated for any specific use of isolations and on any type of uneven surfaces.

Swivel-type levelling mounts with a nylon-pad base and angular adjustment capability. The swivelling foot adapts to uneven floors and angular surfaces while supporting clean, practical machine levelling.

Cast-iron machine mounts with resilient rubber pads and level adjustment for industrial machinery. Final selection is confirmed against load per mount and operating conditions.

Stainless-steel machine mounts for installations requiring resilient vibration damping, levelling capability and corrosion-resistant external hardware.

A compact HDG machine-mount variant with internal threaded provision for equipment where top-level adjustment is inconvenient or access above the mount is restricted.

Hidamp giant buffers provide large deflections under shock input and effective attenuation of structure borne noise in the range of 12.5 to 10,000 Hz.

Hollow-block mounts and bumper components that provide cushioning, support and impact protection where repeated contact, vibration or rough handling can cause wear or structural damage.

Its structure is designed to suit any space limitation areas and their integral bond controls are of special advantage. It prevents inherent noise/vibrations.

Their simple designs and sturdy construction permit their use in a wide variety of applications like control panels, HVAC equipments, relays, fans etc

Hidamp precision leveling JACK mounts are manufactured as a free stand series and are well suited for machinery without bolting fixtures.

Jack-bolt wedge mounts for firm machine holding and applications with high axial thrust. They support positional stability where impact or thrust means the machine cannot be allowed to creep or shift.

Industrial conical mount series isolators are designed to withstand the rigors of heavy-duty vehicular mobile applications, off road equipments, railways and wind mill applications

Hidamp pad series is very efficient in isolating textile machinery such as Ring Frames from passive vibrational forces. The pads are available in various shapes and sizes to suit the various models of machines

Tubular rubber-to-metal bonded mounts that support load while allowing controlled deflection in a compact cylindrical mounting format.

Hidamp RH series mounts are best suited for effective isolation of noise and vibration in diesel engines, Generators, A/C units, general machinery, amusement parks equipments, construction/farm equipments, compressors etc…

Hidamp heavy-duty SB and RB series buffers are specifically designed for isolation of heavy machineries like mixers presses etc. Ideal for high static and shock Loads in compression.

This is low profile, high load carrying capacity mounts for vibration and shock protection and is compact in size and is stable. Best suited for isolation of vibration in buses, trucks and marine engines.

Double ‘U’ Shear mounting as generally called comes in wider ranges from 1 Kg to 1000 Kg per mounting and can be used for motors, relays, timings devices, fans, control panels, blowers, air conditioners, business machines, applications etc

Cup mounts for equipment requiring vibration isolation together with protection against shock and rebound movement.

Hidamp heavy-duty buffers are specifically designed for isolation of heavy machineries like mixers presses etc. Ideal for high static and shock Loads in compression.

These are all rubber spring mounts with high deflection properties and used in low frequency application such as vibrators, compressors, and automobile suspension systems etc.

Maximize Your Performance with HIDAMP’s Rubber Beadings Introduction to Rubber Beadings: . Rubber Beadings are an essential component for industries and construction requirements, providing the necessary support for vibrating screens. Our company offers a wide range of rubber beading options, including Aluminum Door and Window Rubber Beading, Synthetic Rubber Beading, EPDM Rubber Beading, and Stone […]